EDS-518A Series

16+2G-port Gigabit managed Ethernet switches

Documento em PDF

Produtos Relacionados

  Switch gerenciável
  Switch Gerenciável
  Rackmount Switch
  PoE Switch
  Industrial Gateway

Índice Industrial Ethernet

Retornar

Orçamento Retornar

Features and Benefits

IPv6 Ready logo awarded (IPv6 Logo Committee certified)
IEEE 1588 PTP (Precision Time Protocol) for precise time synchronization of networks
DHCP Option 82 for IP address assignment with different policies
Modbus/TCP industrial Ethernet protocol supported
Turbo Ring and Turbo Chain (recovery time < 20 ms at full load), and RSTP/STP (IEEE 802.1w/D)
IGMP snooping and GMRP for filtering multicast traffic
Port-based VLAN, IEEE 802.1Q VLAN and GVRP to ease network planning
QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism
Port Trunking for optimum bandwidth utilization
SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
SNMPv1/v2c/v3 for different levels of network management
RMON for efficient network monitoring and proactive capability
Bandwidth management prevents unpredictable network status
ABC-01 (Automatic Backup Configurator) for system configuration backup
Port mirroring for online debugging
Automatic warning through e-mail and relay output
Works with MXview industrial network management software
-40 to 75˚C operating temperature range (T models)

Introduction

The EDS-518A is a standalone 18-port managed Ethernet switch that provides 2 combo Gigabit ports with built-in RJ45 or SFP slots for Gigabit fiber optic communication. The Ethernet redundant Turbo switchesRing and Turbo Chain (recovery time < 20 ms) increases the reliability and speed of your network backbone. The EDS-518A also supports advanced management and security features.

• Technology:
Standards	IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.1X for Authentication IEEE 802.3ad for Port Trunk with LACP
Protocols	IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, Syslog, DHCP Option 66/67/82, SSH, SNMP Inform, Modbus/TCP, LLDP, IEEE 1588 PTP, IPv6
MIB	MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control	IEEE802.3x flow control, back pressure flow control

• Switch Properties:
Priority Queues	4
IGMP Groups	256
Max. Number of Available VLANs	64
VLAN ID Range	VID 1 to 4094

• Interface:
RJ45 Ports	10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speed
Fiber Port(s)	100BaseFX (SC/ST connector) and 1000BaseSFP slot
LED Indicators	PWR1, PWR2, FAULT, 10/100M (TP port), 100M (fiber port), MSTR/HEAD, CPLR/TAIL
Alarm Contact	2 relay outputs with current carrying capacity of 1A @ 24 VDC
Digital Inputs	2 inputs with the same ground, but electrically isolated from the electronics •+13 to +30V for state “1” •-30 to +3V for state “0” •Max. input current: 8 mA
Console Port	RS-232 (RJ45 connector)

• Optical Fiber

• Power Requirements:
Input Voltage	24 VDC (12 to 45 VDC), redundant dual inputs
Input Current	EDS-518A: 0.51 A @ 24 V EDS-518A-MM/SS: 0.61 A @ 24 V
Overload Current Protection	Present
Connection	2 removable 6-contact terminal blocks
Reverse Polarity Protection	Present

• Physical Characteristics:
Housing	Metal, IP30 protection
Weight	1630 g
Dimensions	94 x 135 x 142.7 mm (3.74 x 5.31 x 5.62 in)
Installation	DIN-Rail mounting, wall mounting (with optional kit)

• Environmental Limits:
Operating Temperature	Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)

• Agency Approvals:
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), level 2 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 2 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-12
Safety	UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1
Hazardous Location	UL/cUL Class I, Division 2, Groups A, B, C, and D; ATEX Zone 2, Ex nC IIC
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	IEC 60068-2-6
MTBF (meantime between failures)	Time: 240,000 hrs Database: Telcordia (Bellcore), GB
Maritime	DNV, GL