PT-7710 Series

IEC 61850-3 / EN51055 8+2G-port Gigabit modular managed Ethernet switches

Documento em PDF

Produtos Relacionados

  Switch Não Gerenciável
  Switch Gerenciável
  Industrial Gateway

Índice Industrial Ethernet

Retornar

Orçamento Retornar

Features and Benefits

IPv6 Ready logo awarded (IPv6 Logo Committee certified)
IEEE 1588 PTP (Precision Time Protocol) for precise time synchronization of networks
DHCP Option 82 for IP address assignment with different policies
Modbus/TCP industrial Ethernet protocol supported
Turbo Ring, Turbo Chain, and IEEE 802.1D-2004 RSTP/STP
IGMP snooping and GMRP for filtering multicast traffic from industrial Ethernet protocols
Port-based VLAN, IEEE 802.1Q VLAN, and GVRP protocol to ease network planning
QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism
IEEE 802.3ad, LACP for optimum bandwidth utilization
IEEE 802.1X, HTTPS, and SSH to enhance network security
SNMPv1/v2c/v3 for different levels of network management
RMON for efficient network monitoring and proactive capability
Bandwidth management prevents unpredictable network status
Lock port to limit access to authorized MAC addresses only
Port mirroring for online debugging
Automatic warning by exception through email, relay output
Automatic recovery of connected device's IP addresses
Line-swap fast recovery
Configurable by web browser, Telnet/serial console, Windows utility, and ABC-01 automatic backup configurator
Works with MXview industrial network management software

Introduction

The PowerTrans PT-7710 is designed to meet the demands of power substation automation systems (IEC 61850-3, IEEE 1613), traffic control systems (NEMA TS2), and railway applications (EN50155/EN50121-4). The PT-7710’s Gigabit and fast Ethernet backbone, redundant ring, and 12/24/48 VDC dual redundant power supplies or 110/220 VDC/VAC power supplies increase the reliability of the communications and reduce cabling and wiring costs. The modular design of the PT-7710 makes network planning easy, and allows greater flexibility by letting you install up to 2 Gigabit ports and 8 fast Ethernet ports, or 10 fast Ethernet ports.

This product supports expansion modules. Click here for info on available modules.

• Technology:
Standards	IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100Base FX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.1X for Authentication IEEE 802.3ad for Port Trunk with LACP
Protocols	IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog, DHCP Option 66/67/82, LLDP, Modbus/TCP, IEEE 1588 PTP, IPv6, SNMP Inform
MIB	MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control	IEEE 802.3x flow control, back pressure flow control

• Switch Properties:
Priority Queues	4
IGMP Groups	256
Max. Number of Available VLANs	64
VLAN ID Range	VID 1 to 4094
Alarm Contact	1 relay output with current carrying capacity of 3 A @ 30 VDC or 3 A @ 240 VAC

• Interface:
Fast Ethernet	Slot 1 for any combination of 4, 6, 7, or 8-port PM-7200 fast Ethernet modules with 10/100BaseT(X) (TP/M12 interface), 100BaseFX (SC/ST connector), or 100BaseSFP; Slot 2 for 1 or 2-port interface modules with 100BaseFX (SC/ST connector)
Gigabit Ethernet	Slot 2 for 2-port PM-7200 Gigabit Ethernet combo module, 100/1000BaseT(X) or 1000BaseSFP
Alarm Contact	1 relay output with current carrying capacity of 3 A @ 30 VDC or 3 A @ 240 VAC
System LED Indicators	STAT, PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL
Mode LED Indicators	LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEED
Console Port	RS-232 (RJ45)

• Power Requirements:
Input Voltage	• 12/24/48 VDC (9 to 60 V) • 110/220 VDC/VAC (88 to 300 VDC and 85 to 264 VAC)
Input Current	• Max. 0.81 A @ 24 VDC • Max. 0.42 A @ 48 VDC • Max. 0.17/0.10 A @ 110/220 VDC • Max. 0.20/0.12 A @ 110/220 VAC
Overload Current Protection	Present
Connection	10-pin terminal block
Reverse Polarity Protection	Present

• Physical Characteristics:
Housing	IP30 protection
Weight	2200 g
Dimensions	266.5 x 44 x 195 mm (10.5 x 1.7 x 7.7 in)
Installation	19" rack mounting, wall mounting

• Agency Approvals:
EMI	FCC Part 15, CISPR (EN55022) class A
Safety	UL60950-1, CSA C22.2 No. 60950-1, EN60950-1
Traffic Control	NEMA TS2 (Pending)
Rail Traffic	EN50155/EN50121-4
Power Automation	IEC 61850-3, IEEE 1613

• Environmental Limits:
Operating Temperature	-40 to 85°C (-40 to 185°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)